Schluter^®-LIPROTEC-CW

Câble pour système LIPROTEC avec DEL blanc

Le câble LIPROTEC-CW est équipé d’un presse-étoupe préinstallé, pour une connexion étanche à la niche, et de connecteurs pour la fixation de la bande à DEL.

Classé pour installation dans les murs – aucun conduit requis
Class 2 low voltage cable (CL2)
Classé FT4 par CSA (80°C)
2 conducteurs – 20AWG
Homologué UL aux États-Unis et au Canada
Pour vous aider à sélectionner la bonne longueur de câble pour votre projet, reportez vous au guide de planification dans l'onglet Téléchargements

...voir plus ...moins

Afficher le tableau des produits

Schluter®-LIPROTEC-CW connection cables are rated for in-wall installation - no conduit required. The cable features a pre-installed waterproof snap-in gland for a secure connection to the top of the niche, and connectors to attach to the LED strip.

LIPROTEC-CW requires no special maintenance.

The LIPROTEC-CW cable connects the Schluter®-KERDI-BOARD-SNLT niche and the Schluter®-LIPROTEC-ECX or Schluter®-LIPROTEC-ECD driver. For instructions on making cable connections, please refer to the installation instructions for these products.

Need help determining the appropriate cable length for your installation? Check out the Planning Guide in the downloads tab.

Fiches techniques

shower-system-installation-handbook

17,35 MB

Pdf

kerdi-board-snlt-data-sheet

5,54 MB

Pdf

Manuel

shower-system-installation-handbook

17,35 MB

Pdf

liprotec-planning-guide

4,01 MB

Pdf

Brochures et dépliants

shower-brochure

4,43 MB

Pdf

liprotec-brochure

3,87 MB

Pdf

Tableau des produits

kerdi-board-snlt

112,47 KB

Pdf

Garanties

schluter-liprotec-cables-5-year-limited-warranty

263,24 KB

Pdf

FAQ

Q:

What are the components I need to properly install my KERDI-BOARD-SNLT niche?

A:

KERDI-BOARD-SNLT Niche is sold as a 3-part system...

Q:

Do we need to use all three LIPROTEC components? Can I use another driver, LED, or wire?

A:

The LIPROTEC system is specifically designed to work together and is UL listed as a system. The cable and gland seal the wire outlet hole. The LED connectors are...

Q:

Are the components of the LIPROTEC system replaceable?

A:

Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...

Q:

Can the LIPROTEC-CW cable be extended if you do not have enough length to reach the LIPROTEC-ECD or LIPROTEC-ECX power supply?

A:

Yes, the cable can be extended. Our recommendation is to verify and consult with your local electrician, according to the electrical and building codes effective in your region, as to the...

Q:

Can I loosen or reposition the snap-in cable gland on the LIPROTEC-CW cable?

A:

No. Do not loosen or adjust the placement of the gland on the cable. Improper tightening of the gland could...

Voir le tableau complet