Schluter^®-BARA-RW

Profilé en forme de L pour balcons et terrasses

Schluter^®-BARA-RW est un profilé en forme de L servant à la finition des rebords des balcons et terrasses. Ce profilé offre une belle finition, tout en recouvrant et protégeant les rebords exposés de la chape contre les éléments et la corrosion.

S’enfonce solidement dans le ciment-colle et s’intègre à la sous-couche d’imperméabilisation
Peut être installé a posteriori avec les carreaux sur des balcons et terrasses existants
Ailette d’ancrage à perforations courbées particulières permettant de réaliser des formes courbes.
Coins intérieurs et extérieurs à 90° et raccords offerts
Offert en aluminium coloré ou en acier inoxydable

...read more ...show less

Show Product Table

Schluter®-BARA-RW is a stainless steel or color-coated aluminum, L-shaped edging profile for balconies and terraces. The profile provides a neat edge appearance while concealing and protecting the exposed edges of the setting bed against weathering and corrosion.

BARA-RW is suitable for the renovation of balconies and terraces where a tile covering is to be installed onto an existing substrate using the thin-bed method. The profile is solidly embedded into the thin-set mortar and integrated into the bonded waterproof layer.

BARA-RW is available with a special radius perforation “R” so that the profile can be used to form curves. Matching outside corners and connector pieces are available.

BARA-RW requires no special maintenance or care. The coatings on the color-coated aluminum profile are colorfast and UV-resistant. Damaged surfaces shall be painted over.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically with a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

1. Select BARA-RW according to the thickness of the setting bed (i.e., the height of the floor assembly to be covered). Prefabricated corners and connectors are available for inside corners, outside corners, and butt joints. Abut the ends of the profile, leaving an approx. 3/16" (5 mm) joint. Cover the joint with the clip-on connector.

2- Utilizando una llana dentada, aplique mortero de capa fina al área en que ubicará BARA-RW. Presione el ala de fijación perforada en el mortero de capa fina y alinee.

3- Para integrar la membrana DITRA-DRAIN, instale la misma sobre el ala de fijación.

4- Las baldosas deben ubicarse de manera tal que sobresalgan aproximadamente 3/4"(20 mm) del borde del perfil. Cuando utilice un perfil decorativo en el área de borde, el mismo debe sobresalir aproximadamente 5/16"(8 mm) de BARA-RW.