Schluter®-KERDI-SHOWER-FRS🅪
Système d’abaissement de plancher pour douche sans seuil
- Supports en acier galvanisé offrant un soutien solide pour les sous-planchers abaissés
- Conçu pour l’installation d’une douche sans seuil avec un drain standard KERDI-DRAIN
- Aucune modification des solives requise, ce qui préserve l’intégrité structurelle
- Supports fixés directement sur le dessus des solives : pas besoin de lisses
- Compatible avec les solives en I et le bois de construction de dimensions courantes où l’espacement est inférieur à 19,2 po (488 mm) c.-c
- Abaissement du sous-plancher de 11/16 po (17,5 mm)
- Compatible avec une variété de bases KERDI-SHOWER préfabriquées
- Montage par le dessus permettant de réduire les risques d’interférence avec la tuyauterie, les systèmes de chauffage ou de climatisation et les fils électriques se trouvant dans les cavités du plancher
Find recommended accessories here
Estimateur de système de douche
Calculez tous les besoins pour votre projet de douche.
J Brackets fasten to the top of joists and support FRS system inserts in the recessed section of the floor.
P Brackets fasten to the unmodified subfloor at the perimeter, including along wall bottom plates, and support FRS System inserts in the recessed portion of the floor.
Shims allow 5/8” subflooring to be used with KERDI-SHOWER-FRS. Shims are applied to P Brackets to accommodate the additional thickness needed for a secure interface with 5/8” subflooring.
Schluter®-KERDI-SHOWER-FRS™ is installed in the floor under the shower assembly and requires no special maintenance or care. The systems components are resistant to mold and fungi.
For a step-by-step guide on installing the Schluter®-KERDI-SHOWER-FRS™ floor recessing system for curbless showers, visit our installation instructions.
FAQ
What is the maximum allowable joist spacing for KERDI-SHOWER-FRS applications?
Do I have to cut into the floor joists to install KERDI-SHOWER-FRS?
No, KERDI-SHOWER-FRS is designed to recess the subfloor between the joists, eliminating...
Read moreHow many brackets do I need for my KERDI-SHOWER-FRS installation?
The number of brackets required depends on your specific installation conditions, including joist spacing, joist orientation, and...
Read moreWhat adhesives can I use on the KERDI-SHOWER-FRS brackets?
How far should waterproofing extend beyond the shower threshold in a curbless shower?
In a curbless shower, waterproofing should ideally extend across the entire bathroom floor, as it must be installed in...
Read moreDoes the orientation of the plywood inserts matter in KERDI-SHOWER-FRS applications?
Perpendicular placement is preferred, but KERDI-SHOWER-FRS plywood inserts may be installed with...
Read moreCan I use different screws with KERDI-SHOWER-FRS?
No, the screws included with KERDI-SHOWER-FRS kits have been specifically selected and thoroughly tested for...
Read moreWhy do I have leftover brackets and screws in my KERDI-SHOWER-FRS kit after installation?
KERDI-SHOWER-FRS kits were designed to provide the materials needed for most installation conditions...
Read moreCan I recess the entire floor using KERDI-SHOWER-FRS?
Can I use KERDI-SHOWER-FRS with linear drains?
Do I need to pre-drill (i.e., create pilot holes) before fastening the brackets?
No, pilot holes are not required. However, predrilling can increase the speed, ease, and...
Read moreI lost some of the screws from my KERDI-SHOWER-FRS kit, what should I do?
Watch & Learn
About the product
How to install the Schluter®-KERDI-SHOWER-FRS Floor Recessing System
Schluter®-KERDI-SHOWER-FRS Floor Recessing System for Curbless Showers
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
