Schluter®-DILEX-AHKA
Profilé à gorge pour transitions du carrelage avec planchers déjà finis
- Évite d’avoir à utiliser du calfeutrant
- Possède une seule ailette d’ancrage perforée de trous en forme de trapèze qui s’enfonce dans le ciment-colle et une rainure en queue d’aronde qui se colle à la surface de plancher
- Présente un rayon de 3/8" (10 mm) qui prévient l’infiltration d’eau et l’accumulation de la saleté, ce qui facilite le nettoyage
- Idéal pour les aires carrelées soumises à des exigences strictes en matière d’hygiène, comme des cuisines commerciales, des salles de bain et des usines de traitement des aliments
- Coins intérieurs et extérieurs à 90° et 135° ainsi que capuchons d’extrémité offerts
- Offert dans divers finis en aluminium anodisé et coloré
Encuentre aquí los accesorios recomendados
Estimateur de profilés
Découvrez ce dont vous avez besoin pour protéger les carreaux et faciliter les transitions.
Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors. The profile features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel, which can be bonded to floor surfaces using Schluter®-KERDI-FIX, epoxy resin, silicone, thin-set mortar, etc. A 3/8" (10 mm) radius cove section forms the visible surface and prevents the accumulation of dirt, making cleaning simple. DILEX-AHKA prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food-processing plants, or any tiled environment where a sanitary cove base is desired. DILEX-AHKA integrates with the DILEX-AHK and Schluter®-RONDEC profiles at 90° inside and outside vertical wall corners, respectively. Accessories for DILEX-AHKA include 90° and 135° inside and outside corners, and end caps.
DILEX-AHKA requires no special maintenance or care and are resistant to mold and fungi. Clean profile using common household cleaning agents. In the case of anodized aluminum and color-coated aluminum do not use abrasive cleaning agents.
1. Select profile according to tile thickness and format.
2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid-perforated anchoring legs will be placed.
Note: If necessary, fill the dovetailed channel of DILEX-AHKA with KERDI-FIX, epoxy resin, silicone, thin-set mortar or similar to adhere the profile to the existing floor surface.
3. Press the perforated anchoring leg(s) of the profile into the mortar.
Note: Install inside and outside corners, connectors, and end caps prior to setting tile. The use of thin-set mortar or similar may be required to achieve a proper fit.
4. Trowel additional thin-set mortar where the tiles are to be installed.
5. Solidly embed the tiles, ensuring full coverage and support of the tile edges, and align flush with the top of the profile, leaving a joint of approximately 1/16" – 1/8" (1.5 - 3 mm) between the tile and the profile.
6. Fill the joints completely with grout or setting material.
Garantías
FAQ
How do I cut profiles?
Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...
Leer másDibujos CAD
Specify our products using the
Ver y aprender
Acerca del producto
Introduction to Schluter® Profiles
Tips on How to Choose Your Profile Size in Relation to Your Tile
Tips on Cutting Profiles
Encuentre tutoriales y videos de documentación de proyectos para aprender cómo sacar mejor provecho de nuestros productos, ¡empiece ahora y diviértase!
Ver más vídeos / listas de reproducción
