Schluter®-TREP-V
Profilé d’aluminium anodisé pour les escaliers avec bande texturée antidérapante en PVC
- Bande en PVC à texture spéciale qui empêche l’accumulation de saleté et antidérapante dans toutes les directions pour assurer la sécurité dans les escaliers carrelés
- En plus d’être remplaçable, cette bande en PVC est offerte dans une variété de couleurs pour créer des nuances à haute visibilité
- Vendu avec une bande texturée étroite (TREP-V 42) ou large (TREP-V 60)
- Prévient l’effritement des rebords des carreaux dans les escaliers
- Des capuchons de fermeture sont également offerts pour TREP-V
Find recommended accessories here
Estimateur de profilés
Découvrez ce dont vous avez besoin pour protéger les carreaux et faciliter les transitions.
Schluter®-TREP-V is an anodized aluminum profile with a PVC tread designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface. The PVC tread is available in a variety of colors to provide contrast and can be replaced in case of damage or wear. TREP-V is available with either a narrow (TREP-V 42) or wide (TREP-V 60) tread. Matching end caps are also available.
The Schluter®-TREP-V require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents.
The treads of TREP-V can be replaced in case of damage or wear.
1. Select profile size according to tile thickness and format.
2. Install riser tile flush with the stair tread surface.
3. Using a notched trowel, apply thin-set mortar along the edge area above the riser.
4. Fill cavities on the underside of the profile with thin-set mortar.
5. Press the trapezoid-perforated anchoring leg of the profile into the thin-set mortar, making sure the front edge of the support section is aligned flush with the riser tile. Full coverage must be obtained at the edge area to ensure support of the profile.
6. Trowel additional thin-set mortar over the anchoring leg and the stair tread surface to ensure full coverage and support of the tile edges.
7. Solidly embed the tread tiles so that the tiled surface is flush with the top of the profile.
8. A joint of approx. 1/16" - 1/8" (1.5 -3 mm) should be left between the tile and the profile.
9. Fill joint completely with grout or setting material.
Watch & Learn
About the product
Découvrez le profilé de nez de marche, Schluter®-TREP-V
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
