Schluter®-KERDI-LINE in Matte Black
Schluter®-Systems is expanding its family of matte black products by introducing two new grates that are available for its KERDI-LINE linear drain.
Search Results for
R
Radius available for products with this label
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Balcony Profiles
Schluter®-BARA-RWL
R
Schluter®-BARA-RWL
View Product Details
Schluter®-BARA-RWL
Balcony Profiles
Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Profiles
Schluter®-KERDI-BOARD-ZB
Schluter®-KERDI-BOARD-ZB
Profiles
Schluter®-KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
Profiles
Schluter®-KERDI-BOARD-ZA
Schluter®-KERDI-BOARD-ZA
Profiles
Schluter®-KERDI-BOARD-ZA
The Schluter®-KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed to finish edges of partition walls, shelves, and similar structures made with KERDI-BOARD.
Paver Support System
Schluter TROBA-LEVEL-PLV60/-PLA70
Schluter TROBA-LEVEL-PLV60/-PLA70
Paver Support System
Schluter TROBA-LEVEL-PLV60/-PLA70
Schluter-TROBA-LEVEL-PLV 60 adjustable paver supports are designed to support tile pavers of different formats and thicknesses. The supports can be variably adjusted from 2-3/8" to 5-1/8" (60 - 130 mm) using the height adjustment ring and two opposing threads. To achieve greater heights, TROBA-LEVEL-PLA 70 height extensions can be added between the height adjustment ring and the base plate.
Paver Support System
Schluter TROBA-LEVEL-LV3/-PL10
Schluter TROBA-LEVEL-LV3/-PL10
Paver Support System
Schluter TROBA-LEVEL-LV3/-PL10
Schluter-TROBA-LEVEL-LV 3/-PL 10 stackable paver supports are designed to support tile pavers of different formats and thicknesses. TROBA-LEVEL-LV 3 stackable paver supports are designed for low assembly heights and can be used in combination with TROBA-LEVEL-PL 10 as base plates for additional load distribution.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZS/-ZT
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding washers.
Drains / Adaptor Drains
Schluter®-KERDI-DRAIN-A
Schluter®-KERDI-DRAIN-A
Drains / Adaptor Drains
Schluter®-KERDI-DRAIN-A
The Schluter®-KERDI-DRAIN-A adaptor kits are designed to convert clamping ring drains by equipping them with an integrated bonding flange.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Kerdi-Line Matte Black
KERDI-LINE Grates Now in Matte Black
Schluter Profiles in Classic Colors
The classic looks of both black and white never seem to go out of style. To support these common design choices, Schluter®-Systems now provides black and white finish options for their most popular profiles.
Matching Finishes on Drains, Shelves, Profiles
Schluter-Systems’ popular TRENDLINE textured finishes will now be applied to the KERDI-DRAIN-STYLE series of shower drain grates and the recently launched Schluter®-SHELF shower shelves.
Q:
Why isn't my LIPROTEC LED lighting up or is flickering?
A:
Incorrect or poor wiring connection. The polarity of low voltage V+ (RED) and V-(Black) are reversed OR the circuit breaker is off or tripped. Recheck all connections.
Read more
Q:
What if my LIPROTEC LED turns on but doesn't dim?
A:
The slider is misaligned. Remove the faceplate on the ECX. Slide the black dimming lever on the ECX housing to the bottom and the face plate slider to...
Read more
Q:
I have verified a 120V input to my power supply and 24V output but my LIPROTEC LED still does not illuminate. What should I do?
A:
Ensure that the low voltage (+ and -) connections are correct and not reversed. The connections should be...
Read more
