Search Results for

R

Radius available for products with this label

Radius available for this product

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-BT
Schluter®-DILEX-BT Schluter®-DILEX-BT

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-BT
Schluter®-DILEX-BT is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
View Product Details

For Walls / Edging & Outside Wall Corners

Schluter®-DECO-DE
Schluter®-DECO-DE Schluter®-DECO-DE

For Walls / Edging & Outside Wall Corners

Schluter®-DECO-DE
Schluter®-DECO-DE is a stainless steel finishing and edge-protection profile for 135° outside corners of tiled surfaces.
View Product Details

For Walls / Heavy-duty Corners

Schluter®-ECK-KHK
Schluter®-ECK-KHK Schluter®-ECK-KHK

For Walls / Heavy-duty Corners

Schluter®-ECK-KHK
Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.
View Product Details

For Walls / Heavy-duty Corners

Schluter®-ECK-KI
Schluter®-ECK-KI Schluter®-ECK-KI

For Walls / Heavy-duty Corners

Schluter®-ECK-KI
Schluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
View Product Details

Profiles

Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW Schluter®-KERDI-BOARD-ZW

Profiles

Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
View Product Details

For Walls / Heavy-duty Corners

Schluter®-ECK-K
Schluter®-ECK-K Schluter®-ECK-K

For Walls / Heavy-duty Corners

Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
View Product Details

Profiles

Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC Schluter®-KERDI-BOARD-ZC

Profiles

Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
View Product Details

Balcony Profiles

Schluter®-BARA-RWL
R Schluter®-BARA-RWL Schluter®-BARA-RWL

Balcony Profiles

Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
View Product Details

For Floors / Sloped Transitions

Schluter®-RENO-TK
R Schluter®-RENO-TK Schluter®-RENO-TK

For Floors / Sloped Transitions

Schluter®-RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
View Product Details

For Walls / Decorative

Schluter®-QUADEC-FS
Schluter®-QUADEC-FS Schluter®-QUADEC-FS

For Walls / Decorative

Schluter®-QUADEC-FS
Schluter®-QUADEC-FS is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.
View Product Details

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-F
Schluter®-DILEX-F Schluter®-DILEX-F

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
View Product Details

Cove-shaped Profiles

Schluter®-DILEX-HKS
Schluter®-DILEX-HKS Schluter®-DILEX-HKS

Cove-shaped Profiles

Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
View Product Details
Schluter Profiles in Classic Colors

The classic looks of both black and white never seem to go out of style. To support these common design choices, Schluter®-Systems now provides black and white finish options for their most popular profiles.

Fine Profile Specifically for Glass Mosaics

Schluter®-FINEC is a finishing and edge protection profile for the external edges of delicate tile coverings and glass mosaics.

More Color Options for Schluter Profiles

DILEX: 4 new colors to match popular grout colors...

Is KERDI-FIX a suitable adhesive to glue down the VINPRO profiles?

KERDI-FIX is our recommended adhesive for installing VINPRO profiles ...

Q:

What is the difference between Schluter®-JOLLY and Schluter®-JOLLY-P profiles?

A:

JOLLY profiles' new design introduces 90° vertical wall section that allows for better alignment and appearance when abutting with other profiles...

Read more
Q:

Do I need to provide movement joints when I use Schluter-DITRA in my tile installation?

A:

Yes. DITRA does not eliminate the need for movement joints. Movement joints are essential in any tile installation to prevent...

Read more
Q:

Once the LIPROTEC LED is installed into the mounting profile, how do you get it out safely if needed?

A:

The LED can be removed from the mounting profile, and you can test its operation without fully installing directly into place. Removal of the LED can be...

Read more
04:55

Schluter®-VINPRO: Profiles for resilient floor and wall coverings

06:16

How to Install the Schluter®-SHOWERPROFILE-WS/-WSK Profiles

05:33

Schluter®-KERDI-BOARD: Product Overview: Panels, Profiles & Accessories

08:19

Schluter®-KERDI-LINE Grate Assembly & SHOWERPROFILE-S/-R System Profiles