KERDI-LINE Installation Instructions
Click here for a complete instructions on how to install the Schluter-KERDI-LINE in your shower.
Search Results for
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
For Walls / Decorative
Schluter®-DECO-SG
Schluter®-DECO-SG
For Walls / Decorative
Schluter®-DECO-SG
Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings. The profile may also be used as a support channel for glass walls. The 1/2" wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
Profiles
Schluter®-KERDI-BOARD-ZB
Schluter®-KERDI-BOARD-ZB
Profiles
Schluter®-KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
KERDI-BOARD-SNLT Illuminated Shower Niche
Discover Schluter®-KERDI-BOARD-SNLT prefabricated shower niches with integrated LIPROTEC LED technology and how an illuminated shower niche can transform your shower space.
KERDI-SHOWER-KIT Installation Instructions
Find out all the information you need to know to install the Schluter-SHOWER-KIT.
Q:
Can I use Schluter®-KERDI in my steam shower?
A:
Yes. KERDI is suitable for use in intermittent use steam showers. Schluter®-KERDI-DS is required for continuous use steam rooms...
Read more
Q:
How far up the wall do I need to install the Schluter®-KERDI?
A:
For showers and bathtub surrounds, KERDI must be carried to the height of the showerhead at minimum...
Read more
Q:
What are your shipping rates?
