Kerdi Drain Grates Metallic Finish
Shower grates are no longer just an opening in the floor to let the water escape – they are part of the design of the bathroom.
Search Results for
R
Radius available for products with this label
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW is a PVC cove-shaped profile for inside wall corners and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Drains / Shower Drains
Schluter®-KERDI-LINE-VARIO
Schluter®-KERDI-LINE-VARIO
Drains / Shower Drains
Schluter®-KERDI-LINE-VARIO
Schluter®-KERDI-LINE-VARIO is a variable length linear drain for tiled showers. The stainless steel channel and grate assembly can be cut to size on-site, and are therefore customizable to fit various shower sizes. The drain body is made of polypropylene and includes both PVC and ABS couplings for a simple connection to the drainpipe. KERDI-LINE-VARIO features a slim, 1-11/16” (43 mm) wide design and is offered in four grate designs to match with the latest trends in tile.
Profiles
Schluter®-KERDI-BOARD-ZB
Schluter®-KERDI-BOARD-ZB
Profiles
Schluter®-KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP/-MPV
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP is a screed joint profile with rigid PVC side sections that protect tile edges and a soft chlorinated polyethylene (CPE) movement zone that separates individual fields in the tile assembly and forms the visible surface.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
For Floors / Sloped Transitions
Schluter®-RENO-V
Schluter®-RENO-V
For Floors / Sloped Transitions
Schluter®-RENO-V
Schluter®-RENO-V is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations.
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA & DITRA-XL
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY
R
Schluter®-JOLLY
View Product Details
Schluter®-JOLLY
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY
Schluter®-JOLLY features a 90° angle and is a finishing and edge-protection profile for the outside corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Its 90° angle creates a clean, flush look on wall corner installations, and the joint spacers on both sides of the profile ensure consistent grout joints and perfect symmetry. Matching corners are available, which feature innovative plug-in connections that result in clean, visually appealing corner applications.
Schluter Trailer Reduces Emissions
A new tractor trailer designed to carry 50% more DITRA membrane is improving shipping productivity for Schluter-Systems and dramatically reducing CO2 emissions. The new trailer is being used to deliver Schluter’s DITRA uncoupling membrane from the factory to the Schluter warehouse, taking only two trips to deliver as much material as used to be delivered in three.
Residential steam showers
Find out about waterproofing requirements for residential steam showers.
Q:
What is the difference between Schluter®-JOLLY and Schluter®-SCHIENE profiles?
A:
SCHIENE is designed to provide edging for tile coverings on floors. Typical applications include edge protection where...
Read more
Q:
What happens to my heating schedule if the thermostat loses power?
A:
Once the power is restored, the thermostat will return to the existing heating schedule...
Read more
Q:
I no longer want to use the Wi-Fi connectivity of my DITRA-HEAT-E-WiFi thermostat. How do I turn off this feature?
