Winter Warmth
Heated floors give this bathroom an a-peel-ing allure thanks to DITRA-HEAT-PS.
Search Results for
R
Radius available for products with this label
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
For Floors / Same-height Transitions
Schluter®-DECO
R
Schluter®-DECO
View Product Details
Schluter®-DECO
For Floors / Same-height Transitions
Schluter®-DECO
Schluter®-DECO provides decorative lines within tile coverings and edge protection at transitions from tile coverings to other same-height surface coverings, such as wood or carpet.
Balcony Profiles
Schluter®-BARA-RWL
R
Schluter®-BARA-RWL
View Product Details
Schluter®-BARA-RWL
Balcony Profiles
Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-S
Schluter®-VINPRO-S
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-S
Schluter®-VINPRO-S is designed to provide a finished edge for resilient coverings (e.g., LVT) in applications that typically border floor coverings of similar heights, or as a finishing edge to wall skirting applications. The profile features a minimal and discreet reveal to enhance the coverings while offering transition and edge protection.
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA & DITRA-XL
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
For Floors / Same-height Transitions
Schluter®-SCHIENE
R
Schluter®-SCHIENE
View Product Details
Schluter®-SCHIENE
For Floors / Same-height Transitions
Schluter®-SCHIENE
Schluter®-SCHIENE is an edging profile featuring an 87° angle designed to provide effective and attractive edge protection for floor tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Choosing the Right Tile Edge Trim
Tile trim profiles do more than just complete the look. They play a vital role in protecting the edges of your installation, creating smooth transitions between different flooring types, and adding a polished finish to your project. The right profile can make a significant difference, both in the longevity of the installation and the overall appearance.
Craft Brew
This residential micro-brewery needs the right tile support! DITRA membrane acts as an uncoupling membrane beneath the tile for a crack-free installation.
DILEX-F Slimmest Movement Joint Profile
Discover Schluter®-DILEX-F, the ultra-slim movement joint profile engineered for seamless tile installations. Prevent damage, accommodate movement, and elevate aesthetics with ease.
Q:
Why are two floor temperature sensors provided with the Schluter®-DITRA-HEAT system?
A:
Both floor temperature sensors are installed within the tile assembly. One sensor is connected to the thermostat, while...
Read more
Q:
What is the length of the sensor wire and can it be extended?
A:
The floor temperature sensor is appx. 13 ft (4 m) in length and can be extended using an 18 AWG, 2-wire cable...
Read more
Q:
How do I protect my laminate / LVT / SPC flooring or similar for a maximum floor temperature of 82°F (28°C)?
A:
In the "Advanced" settings, when in "Floor" control mode or in "Ambient" control mode, set "Max. Floor Temperature" to...
Read more
