Tile Installation on Problematic Substrates
Presented at Qualicer, Castellon, Spain, William M. Carty, Ph.D. and Peter A. Nielsen,
Search Results for
Cables
Schluter®-DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK
Cables
Schluter®-DITRA-HEAT-E-HK
Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK is a PVC, cove-shaped profile with a single anchoring leg for inside wall corners, countertop/backsplash transitions and floor/wall transitions where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW is a PVC cove-shaped profile for inside wall corners and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
New Schluter Website
Schluter®-Systems has launched a completely new website that simplifies navigation and provides several interactive tools that make it much easier to design and specify tile projects.
Kerdi-Board Building Panels
Sean Gerolimatos
Q:
Can DITRA-HEAT-DUO-PS be repositioned after the membrane is first embedded to the substrate?
A:
DITRA-HEAT-DUO-PS, depending on substrate and pressure used to initially embed membrane, can be repositioned if needed during installation...
Read more
Q:
How can I choose the best profile height for my resilient covering?
A:
We recommend choosing the profile height that is up to a 0.5 mm greater than the coverings thickness ...
Read more
Q:
Can I pull power from my DITRA-HEAT or other floor heating circuit to power my LIPROTEC LED?
A:
No. Floor heating should be on a dedicated circuit. You also increase the risk of accidentally miswiring the lighting into a 240V circuit.
Read more
