The RONDEC inside and outside corners eliminate the need for a mitered edge and produce a clean, finished result without the time and work required for manually finishing the end of a profile. This will speed up the installation and enhance the project with a modern, uniform, and professional end result. Standard corners are available in 90° angle, for both inside or outside corners.
The RONDEC double-leg corners simplify the framing of smaller elements with the RONDEC profile, such as niches, windows etc. The legs are also detachable for use in applications where a single-leg corner is needed.
The RONDEC stainless steel sink corners are used with the RONDEC profile to create tiled-under sinks. These corners have a larger radius (3/8” - 10 mm or 1-1/2” – 38 mm), that allow them to match up to the contour of most standard sinks. The 3/8” corner piece features a double-leg design for ease of installation, while the 1-1/2” corner includes two stainless steel connectors to maintain the alignment of the corner piece and profiles during installation.
Connectors are available to simplify the alignment of adjacent profile sections. They are inserted into the end of corresponding profiles, and then hidden when the profiles are installed. They are made of either PVC for aluminum profiles or stainless steel for stainless steel profiles.
The RONDEC end caps feature a bendable leg that is inserted into the RONDEC profile, and a brushed stainless steel plate that covers the open area of the profile in applications where the end of the profiles is left to be exposed. The RONDEC end caps can be used with stainless steel or brushed stainless steel RONDEC profiles.