Schluter®-VINPRO-T
Retrofit resilient surface floor profile for same-height transitions
- NEW! Now available in 1" (25mm)
- Prevents resilient surface coverings from chipping
- Ideal for floor installations where tile is bordered by wood, laminate, or other hard floor coverings
- Designed for floor transitions in retrofit applications
- Available in anodized aluminum in three finish colors
Find recommended accessories here
Profile Estimator
Discover what you need for tile protection and easy transitions.
Schluter-VINPRO-T is designed to provide transitions between existing same-height, resilient floor coverings, in new and retrofit applications (e.g. LVT). VINPRO-T is installed within the joint cavity and overlaps adjoining surface materials, thus preventing edges from becoming damaged when subjected to mechanical stress.
Schluter resilient surface covering profiles require no special maintenance or care and are resistant to mold and fungi. Clean profiles using neutral cleaning agents. For anodized aluminum, do not use abrasive or strong alkaline cleaning agents.
1. To ensure proper support of the lateral crosspiece, ensure the joint width is less than 1/2" (12.5 mm) or 1" (25 mm).
2. The joint cavity must be at least 1/8" (3mm) deep and free of debris. Substances that inhibit adhesion must be removed from the sides of the joint.
3. Fill the joint with elastomeric sealant such as Schluter-KERDI-FIX or similar. Insert the vertical leg of VINPRO-T in the joint so that lateral crosspiece rests completely on the edges of the surface covering.
4. Remove any excess sealant with suitable cleaner.
FAQ
Are screws included with the VINPRO profiles?
Is a leveling patch required to feather out the anchoring leg to prevent telegraphing through to the top surface of the vinyl flooring?
What finishes are the VINPRO profiles available in?
The VINPRO profiles are available in brushed chrome (ACGB), brushed nickel (ATGB), and brushed antique bronze (ABGB) ...
Read moreHow can I choose the best profile height for my resilient covering?
We recommend choosing the profile height that is up to a 0.5 mm greater than the coverings thickness ...
Read more
Watch & Learn
About the product
Schluter®-VINPRO: Profiles for resilient floor and wall coverings
Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!
Watch more videos / playlists
