Schluter®-INDEC

Schluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.

  • Prevents tile edges from chipping
  • Sleek, squared, modern design
  • Corner pieces, that can also be used as end caps
  • Available in various finishes of anodized aluminum
Read more

Schluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.

  • Prevents tile edges from chipping
  • Sleek, squared, modern design
  • Corner pieces, that can also be used as end caps
  • Available in various finishes of anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-INDEC

Schluter®-INDEC

Finishing and edge-protection profile for outside corners with a square, recessed groove
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC
Schluter®-INDEC

Product type

Next

AccessoriesLearn More

Recommended products based on your specifications

/

Schluter®-INDEC is an anodized aluminum finishing and edge-protection profile for outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and the visible surface forms a recessed decorative channel. INDEC can be used as a transition or stop profile to a door or window frame. Matching outside corners are available.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where profile is to be placed.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile, leaving a space for grout of approximately 1/16" – 1/8" (1.5 - 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: Matching corners are available for the INDEC. The end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories.

The Schluter®-INDEC profile requires no special maintenance or care and are resistant to mold and fungi. Clean profiles using common household cleaning agents. In the case of anodized aluminum, do not use abrasive cleaning agents.

Downloads

Brochures and Pamphlets

Data sheets

Warranties

FAQ

Architectural Material

Spec. Guides

Specify our products using the Specification Logo

Watch & Learn about this product

/

Schluter®-QUADEC

Edging & Outside Wall Corners

Schluter®-QUADEC

Finishing and edge-protection profile with a squared reveal surface

Schluter®-DECO-SG

Decorative

Schluter®-DECO-SG

Decorative, edge-protection profile with wide channel creating a shadow gap between tile courses

Schluter®-RONDEC

Edging & Outside Wall Corners

Schluter®-RONDEC

Finishing and edge-protection profile with a rounded reveal surface

Schluter®-DECO-DE

Edging & Outside Wall Corners

Schluter®-DECO-DE

Decorative, edge-protection profile for 135° outside corners

Schluter®-JOLLY

Edging & Outside Wall Corners

Schluter®-JOLLY

Finishing and edge-protection profile for outside corners and tile edges on walls

Schluter®-DECO

Same-height Transitions

Schluter®-DECO

Decorative, edge-protection profile

Schluter®-DESIGNLINE

Decorative

Schluter®-DESIGNLINE

Decorative border profile

Schluter®-PROCUT-TSM

Tools

Schluter®-PROCUT-TSM

Cutting wheel for metal profiles