Schluter®-DECO-SG

Schluter®-DECO-SG is a decorative profile featuring a 1/2” (12.5 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings.

  • Creates decorative shadow gap between tiles
  • Support channel for glass walls, up to a thickness of 3/8” (10 mm)
  • Available in satin anodized aluminum and bright chrome anodized aluminum
Read more

Schluter®-DECO-SG is a decorative profile featuring a 1/2” (12.5 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings.

  • Creates decorative shadow gap between tiles
  • Support channel for glass walls, up to a thickness of 3/8” (10 mm)
  • Available in satin anodized aluminum and bright chrome anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-DECO-SG

Schluter®-DECO-SG

Decorative, edge-protection profile with wide channel creating a shadow gap between tile courses
Schluter®-DECO-SG
Schluter®-DECO-SG
Schluter®-DECO-SG
Schluter®-DECO-SG
Schluter®-DECO-SG

Product type

Next

Schluter®-DECO-SG is an anodized aluminum, decorative profile featuring a 1/2" (12.5 mm) wide channel that provides a shadow gap between tile courses or other wall covering. The profile may also be used as a support channel for glass walls, up to a thickness of 3/8" (10 mm). DECO-SG features a trapezoid-perforated anchoring leg that is secured in the bond coat beneath the tile.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where profile is to be placed.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile, leaving a space for grout of approximately 1/16" – 1/8" (1.5 – 3 mm).

7. Fill the joints completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

The Schluter®-DECO-SG profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles using common household cleaning agents. In the case of anodized aluminum, do not use abrasive cleaning agents.

Downloads

Warranties

Brochures and Pamphlets

Data sheets

Handbooks

FAQ

Architectural Material

Spec. Guides

Specify our products using the Specification Logo

Watch & Learn about this product

/

Schluter®-INDEC

Edging & Outside Wall Corners

Schluter®-INDEC

Finishing and edge-protection profile for outside corners with a square, recessed groove

Schluter®-QUADEC

Edging & Outside Wall Corners

Schluter®-QUADEC

Finishing and edge-protection profile with a squared reveal surface

Schluter®-QUADEC-FS

Decorative

Schluter®-QUADEC-FS

Double-rail edging profile for bonding accent tile

Schluter®-DECO-DE

Edging & Outside Wall Corners

Schluter®-DECO-DE

Decorative, edge-protection profile for 135° outside corners

Schluter®-JOLLY

Edging & Outside Wall Corners

Schluter®-JOLLY

Finishing and edge-protection profile for outside corners and tile edges on walls

Schluter®-DESIGNLINE

Decorative

Schluter®-DESIGNLINE

Decorative border profile

Schluter®-PROCUT-TSM

Tools

Schluter®-PROCUT-TSM

Cutting wheel for metal profiles