Schluter®-DILEX-HKU

Stainless steel cove-shaped profile with inverted anchoring leg

Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
  • Eliminates the need for caulking
  • Separates tile fields that meet at inside corners where limited movement is expected
  • May be installed with tile coverings, or with other floor coverings that are fastened or adhered (i.e. no floating floors)
  • Features a single trapezoid-perforated anchoring strip that turns inward, and is secured in the mortar bond coat
  • Features a 3/8" (10 mm) or 1-13/32” (36 mm) radius to prevent water penetration and dirt accumulation, making cleaning simple
  • 90° and 135° inside and outside corners, and connectors available
  • Available in stainless steel 316L (1.4404 = V4A); contact Customer Service for pricing and availability
  • Available with EPS foam internal connectors
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DILEX-HKU features a single trapezoid-perforated anchoring leg that turns inward, which is secured in the mortar bond coat, and a stainless steel cove section that forms the visible surface. The profile’s 3/8" (10 mm) or 1-13/32" (36 mm) radius prevents the accumulation of dirt and makes cleaning simple. The profile separates tile fields that meet at inside corners where limited movement is expected. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided that the coverings are fastened or adhered (i.e., no floating floors). DILEX-HKU prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, food-processing plants, or any tiled environment where a sanitary cove is desired. Accessories available for the DILEX-HKU include inside and outside corners, connectors, and end caps.

DILEX-HKU requires no special maintenance or care and are resistant to mold and fungi. Clean profile using common household cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

1. Select profile according to tile thickness and format.

Note: DILEX-HKU with 3/8" (10 mm) radius may be used with 1/4" (6 mm) and thicker tiles. DILEX-HKU with 1-13/32" (36 mm) radius may be used with 5/16" (8 mm) and thicker tiles.

2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid-perforated anchoring legs will be placed.

Note: When using thicker tiles with DILEX-HKU, apply additional mortar behind the anchoring leg.

3. Press the perforated anchoring leg(s) of the profile into the mortar.

Note:  Internal connectors for DILEX-HKU are inserted prior to profile installation. Leave approximately a ½” (12.5 mm) space between the adjacent profiles. This space will be covered by the surface applied connectors. The DILEX-HKU  accessories are applied using permanently elastic, waterproof adhesive (e.g. KERDI-FIX or silicone).

4. Trowel additional thin-set mortar where the tiles are to be installed.

5. Solidly embed the tiles, ensuring full coverage and support of the tile edges, and align flush with the top of the profile, leaving a joint of approximately 1/16" – 1/8" (1.5 - 3 mm) between the tile and the profile.

6. Fill the joints completely with grout or setting material.

Data sheets

Movement Joints Data Sheet
1.34 MB
Pdf

Product Table

11203-preview
16.02 KB
CoveShaped_Profiles
2.87 MB
Pdf

Warranties

MovementJointsandCoveShaped-Profiles-Warranty
57.92 KB
Pdf

Brochures and Pamphlets

Commercial Product Overview
5.34 MB
Pdf
Profile Brochure
2.14 MB
Pdf
Profile Finishes and Colors
2.45 MB
Pdf

Articles

tileletter-tiling-entryways-foyers-kerdi
4.35 MB
Pdf

CAD drawings

schlueter_cad_dilex_hku_imp
16.37 KB
Pdf
schlueter_cad_dilex_hku_inst
80.22 KB
DWG
schlueter_cad_dilex_hku_metr
16.61 KB
Pdf
schlueter_cad_dilex_hku_imp
63.43 KB
DWG
schlueter_cad_dilex_hku_inst
24.76 KB
Pdf
schlueter_cad_dilex_hku_metr
63.37 KB
DWG

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Cove-shaped Profiles

Schluter®-DILEX-EHK

Cove-shaped Profiles

Schluter®-DILEX-AHK

For Walls / Edging & Outside Wall Corners

Schluter®-QUADEC

Cove-shaped Profiles

Schluter®-DILEX-EKE

Cove-shaped Profiles

Schluter®-DILEX-HKW

Cove-shaped Profiles

Schluter®-DILEX-HKS

Cove-shaped Profiles

Schluter®-DILEX-HK

Cove-shaped Profiles

Schluter®-DILEX-PHK