Electric Floor Warming 101
Article originally published on www.scottmcgillivray.com
Search Results for
R
Radius available for products with this label
Balcony Profiles
Schluter®-BARA-RAK
Schluter®-BARA-RAK
Balcony Profiles
Schluter®-BARA-RAK
Schluter®-BARA-RAK is a color-coated aluminum balcony edging profile with a drip lip. It is designed to be fitted to the edges of finished sloped surfaces to form both an edging and a drip lip.
Balcony Profiles
Schluter®-BARA-RW
R
Schluter®-BARA-RW
View Product Details
Schluter®-BARA-RW
Balcony Profiles
Schluter®-BARA-RW
Schluter®-BARA-RW is an L-shaped edging profile for finishing the exposed perimeters of balconies and terraces. The profile provides a neat edge appearance while concealing and protecting the exposed edges of the setting bed against weathering and corrosion.
Waterproofing (KERDI)
Schluter®-KERDI-FLEX
Schluter®-KERDI-FLEX
Waterproofing (KERDI)
Schluter®-KERDI-FLEX
Schluter®-KERDI-FLEX is a flexible polyethylene waterproofing strip used to seal movement joints over DITRA in specialty applications where large movements are expected, i.e. over expansion joints or construction joints.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
Accessories / Profiles
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Accessories / Profiles
Schluter®-SHOWERPROFILE-WS/-WSK
The Schluter®-SHOWERPROFILE-WS and SHOWERPROFILE-WSK are two-part profiles that form a splashguard at the entrance of curbless showers.
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
Drains / Shower Drains
Schluter®-KERDI-DRAIN-H
Schluter®-KERDI-DRAIN-H
Drains / Shower Drains
Schluter®-KERDI-DRAIN-H
Schluter®-KERDI-DRAIN-H provides a horizontal connection to the drain pipe and is available in ABS or PVC with a 2" outlet.
The height compensation board, Schluter®-KERDI-SHOWER-CB can be used to accommodate the drain body and waste pipe height when installing KERDI-DRAIN-H in conjunction with the KERDI-SHOWER-T/-TS/-TT shower trays.
Drains / Shower Drains
Schluter®-KERDI-LINE
Schluter®-KERDI-LINE
Drains / Shower Drains
Schluter®-KERDI-LINE
Schluter®-KERDI-LINE is a low profile linear shower drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage..
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
A New Type of Baseboard for Tiled Floors
Baseboards are one of the finishing touches that help to complete any space. Choosing a baseboard that is attractive, durable and easy to install is particularly important in commercial settings.
Q:
Why are two floor temperature sensors provided with the Schluter®-DITRA-HEAT system?
A:
Both floor temperature sensors are installed within the tile assembly. One sensor is connected to the thermostat, while...
Read more
Q:
What is the length of the sensor wire and can it be extended?
A:
The floor temperature sensor is appx. 13 ft (4 m) in length and can be extended using an 18 AWG, 2-wire cable...
Read more
Q:
How do I protect my laminate / LVT / SPC flooring or similar for a maximum floor temperature of 82°F (28°C)?
A:
In the "Advanced" settings, when in "Floor" control mode or in "Ambient" control mode, set "Max. Floor Temperature" to...
Read more
