Schluter®-KERDI-BOARD-SN

Prefabricated shower niche

Schluter®-KERDI-BOARD-SN is a prefabricated shower niche that is fully sealed, quick to install, and integrates with KERDI and KERDI-BOARD shower assemblies. The larger niche sizes include a KERDI-BOARD shelf that can be installed at any height to create separate compartments within the niche.
  • Fully waterproof and vapor-tight
  • Features sealed inside corners for effective waterproofing
  • To enhance its appearance, frame the niche using select Schluter® profiles
  • Larger sizes include a prefabricated, adjustable KERDI-BOARD shelf
  • Available in four different sizes
 ...read more  ...show less
Waterproofing
Vapor Management

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-KERDI-BOARD-SN is a prefabricated shower niche made of KERDI-BOARD that can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" (12.5 mm) -thick by 2" (50 mm) -wide integrated bonding flange and is available in 12" x 6" (30 x 15 cm), 12" x 12" (30 x 30 cm), 12" x 20" (30 x 51 cm), and 12" x 28" (30 x 71 cm) sizes.

The KERDI-BOARD-SN should be stored flat. In case of outdoor storage, protect the material from direct sunlight and weather exposure.

Schluter®-KERDI over solid backing

1. Determine desired location and trace around the outside of the KERDI-BOARD-SN flange, making sure the lines are level and plumb. Cut and remove the wallboard such that the niche will be supported on both sides by the studs or other wall framing.

2. Insert the niche and fasten to the studs using wood or metal screws, placing the fasteners approximately 1/4" (6 mm) from the edges of the niche. Fasten all corners and limit fastener spacing to 12" (30 cm) o.c.

3. Connections between the niche and walls are made using KERDI membrane, applied with Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar (mixed to a fairly fluid consistency, yet still able to hold a notch). Apply the thin-set mortar using a 1/4" x 3/16" (6 mm x 5 mm) V-notched trowel or the Schluter®-KERDI-TROWEL, which features a 1/8" x 1/8" (3 mm x 3 mm) square-notched design. Apply the membrane over the wall and embed into the mortar throughout its entire surface to ensure proper adhesion. Remove any air pockets. The membrane is subsequently cut to match the niche opening.

Schluter®-KERDI-BOARD over wood or metal framing

1. Determine desired location and trace around the outside of the KERDI-BOARD-SN flange, making sure the lines are level and plumb. Cut and remove the KERDI-BOARD such that the niche will be supported on both sides by the studs or other wall framing.

2. Insert the niche and fasten to the studs using wood or metal screws and KERDI-BOARD-ZT washers, placing the fasteners along the seam between the KERDI-BOARD and the niche. Fasten all corners and limit fastener spacing to 12" (30 cm) o.c.

3. Seal the seams between the niche and walls using KERDI-BAND with Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar ensuring a 2" (50 mm) overlap in all directions.

Note: When using the prefabricated shelf, determine the desired height of the shelf and mark with a level line. Set tile up to that line on the back and sides of the niche. Butter the sides and back of the shelf with Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar and solidly embed it in the niche, resting on the previously installed tile. The shelf may be raised at the back to create a slope, or the tile may be set on a slope, to prevent water from pooling in the finished application.

Warranties

KERDI-BOARD-Warranty
55.51 KB
Pdf

Product Table

11207-preview
25.73 KB
KerdiBoard
618.47 KB
Pdf

Brochures and Pamphlets

Shower Brochure
2.48 MB
Pdf
Curbless Brochure
1.16 MB
Pdf
KERDI-BOARD Brochure
6.01 MB
Pdf

Handbooks

Shower System Installation Handbook
1.76 MB
Pdf
Shower Checklist
2.73 MB
Pdf

Data sheets

Shower System Data Sheet
6.26 MB
Pdf
KERDI-BOARD Data Sheet
5.38 MB
Pdf
Q:

When framing a Schluter®-KERDI-BOARD-SN shower niche with Schluter®-RONDEC, do I use inside or outside corner accessories?

A:

When framing a KERDI-BOARD-SN shower niche you will need to use the 90°...

Read more
Q:

How long do I have to wait before I can install tile on Schluter®-KERDI-BOARD?

A:

For most installations of KERDI-BOARD, tile can be installed right away. Exceptions include curved wall areas and non-bearing...

Read more
Q:

Can I install glass tile over Schluter®-KERDI-BOARD?

A:

Glass tiles are unique products and may require special consideration. Please call Schluter®-Systems...

Read more
Q:

How do I install the prefabricated shelf in the Schluter-KERDI-BOARD-SN shower niche?

A:

When using the KERDI-BOARD-SN prefabricated shelf, determine the desired height of the shelf and mark with a level line...

Read more

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

How to Tile a Niche with Schluter® Profiles

How to Tile a Niche with Schluter® Profiles

11:29
How to install Schluter®-KERDI-BOARD-SN Niche with KERDI Membrane

How to install Schluter®-KERDI-BOARD-SN Niche with KERDI Membrane

04:16
Schluter®-KERDI-BOARD-SN Shower Niche within KERDI-BOARD Assembly

Schluter®-KERDI-BOARD-SN Shower Niche within KERDI-BOARD Assembly

03:07
Schluter®-KERDI-BOARD: Custom Niche

Schluter®-KERDI-BOARD: Custom Niche

03:17

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

LED Shower Niches

Schluter®-KERDI-BOARD-SNLT

Waterproofing (KERDI)

Schluter®-KERDI-BAND

Accessories / Shelves

Schluter®-SHELF-N

KERDI-BOARD Panels

Schluter®-KERDI-BOARD

Accessories

Schluter®-KERDI-BOARD-ZS/-ZT

KERDI-BOARD Panels

Schluter®-KERDI-BOARD-SB

Waterproofing (KERDI)

Schluter®-KERDI

Drains / Shower Drains

Schluter®-KERDI-DRAIN

Schluter ALL-SET®