Shower with point drain
Find out more about effective moisture management and drainage for showers with point drains.
Search Results for
R
Radius available for products with this label
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK is a PVC, cove-shaped profile with a single anchoring leg for inside wall corners, countertop/backsplash transitions and floor/wall transitions where limited movement is expected.
KERDI-BOARD Panels
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD
KERDI-BOARD Panels
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile. KERDI-BOARD allows you to quickly and easily build tile-ready elements in showers, bathtub surrounds and platforms, countertops, vanities, shelving, and more!
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP/-MPV
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP is a screed joint profile with rigid PVC side sections that protect tile edges and a soft chlorinated polyethylene (CPE) movement zone that separates individual fields in the tile assembly and forms the visible surface.
Profiles
Schluter®-KERDI-BOARD-ZA
Schluter®-KERDI-BOARD-ZA
Profiles
Schluter®-KERDI-BOARD-ZA
The Schluter®-KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed to finish edges of partition walls, shelves, and similar structures made with KERDI-BOARD.
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZS/-ZT
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding washers.
Shower & Tub Kits
Schluter®-KERDI-SHOWER-KIT
Schluter®-KERDI-SHOWER-KIT
Shower & Tub Kits
Schluter®-KERDI-SHOWER-KIT
This kit contains all the elements of the complete Schluter®-KERDI-SHOWER-KIT except the KERDI-DRAIN.
Shower & Tub Kits
Schluter®-KERDI-SHOWER-KIT-FLG
Schluter®-KERDI-SHOWER-KIT-FLG
Shower & Tub Kits
Schluter®-KERDI-SHOWER-KIT-FLG
The Schluter®-KERDI-SHOWER-KIT is an all-inclusive package containing each of the components required to create a watertight shower assembly.
Shower & Tub Kits
Schluter®-KERDI-SHOWER-KIT-FL
Schluter®-KERDI-SHOWER-KIT-FL
Shower & Tub Kits
Schluter®-KERDI-SHOWER-KIT-FL
This kit contains all the elements of the complete Schluter®-KERDI-SHOWER-KIT except the drain grate.
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA & DITRA-XL
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
For Floors / Same-height Transitions
Schluter®-SCHIENE
R
Schluter®-SCHIENE
View Product Details
Schluter®-SCHIENE
For Floors / Same-height Transitions
Schluter®-SCHIENE
Schluter®-SCHIENE is an edging profile featuring an 87° angle designed to provide effective and attractive edge protection for floor tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY-P
Schluter®-JOLLY-P
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY-P
Schluter®-JOLLY-P is a PVC profile featuring an 87° angle designed to finish and protect external corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. JOLLY-P in sizes 1/4" (6 mm) and higher features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile.
Curbless Showers
Open concept, or curbless showers are increasing in popularity due to their sophisticated yet simple design, and accessibility.
Workshops for Professionals
Schluter workshops are available across North America. Register now!
Q:
Can I use Schluter®-KERDI in my steam shower?
A:
Yes. KERDI is suitable for use in intermittent use steam showers. Schluter®-KERDI-DS is required for continuous use steam rooms...
Read more
Q:
How far up the wall do I need to install the Schluter®-KERDI?
A:
For showers and bathtub surrounds, KERDI must be carried to the height of the showerhead at minimum...
Read more
Q:
What are your shipping rates?
