Schluter®-ECK-KHK

Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.

  • Ideal for commercial kitchens, bathrooms, food processing plants, or any environment where a sanitary corner is mandatory
  • Features a 5/16" (8 mm)-wide radius to prevent the accumulation of dirt and make cleaning simple
  • Subsequently bonded to the inside corners of existing tile or other wall coverings
  • 2-way and 3-way 90° inside corners are available, as well as 90° outside corners
  • Available in stainless steel and brushed stainless steel
Read more

Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.

  • Ideal for commercial kitchens, bathrooms, food processing plants, or any environment where a sanitary corner is mandatory
  • Features a 5/16" (8 mm)-wide radius to prevent the accumulation of dirt and make cleaning simple
  • Subsequently bonded to the inside corners of existing tile or other wall coverings
  • 2-way and 3-way 90° inside corners are available, as well as 90° outside corners
  • Available in stainless steel and brushed stainless steel
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-ECK-KHK

Schluter®-ECK-KHK

Cove-shaped, edge-protection profile for inside wall corners in retrofit applications
Schluter®-ECK-KHK
Schluter®-ECK-KHK
Schluter®-ECK-KHK
Schluter®-ECK-KHK

Product type

Next

Schluter®-ECK-KHK is a stainless steel profile that is subsequently bonded to the inside corners of existing tile or other wall coverings to produce a clean, decorative finish. As such, the profiles can be installed as a repair so that existing damaged corners do not have to be replaced. ECK-KHK provides a 5/16” (8 mm) radius to prevent the accumulation of dirt and make cleaning simple. Thus, the profile is especially suited for commercial kitchens, bathrooms, food processing plants or any environment where a sanitary corner is desired. Note: Matching inside and outside corners and connectors are available for ECK-KHK.

1. ECK-KHK is applied to prepared wall corners using KERDI-FIX, silicone, or a similar adhesive. Prior to applying the adhesive, make sure that all surfaces are free from adhesion-inhibiting substances such as oil or grease. Apply a bead of adhesive to the back of each of the profile legs; then press the legs onto the wall covering, ensuring that the lateral edges lie flat and have solid contact throughout.

2. Use a suitable cleaning agent to remove any excess adhesive from around the profile legs.

3. Remove the protective foil.

Note: The ECK-KHK connectors should overlap the profiles by at least 3/8” (10 mm).

Install ECK-KHK inside and outside corners using a permanently elastic, waterproof adhesive (e.g., KERDI-FIX or silicone). Prior to application, any contact-inhibiting substances (e.g., grease, etc.) must be removed.

The Schluter®-ECK-KHK profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles using common household cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Downloads

FAQ

Architectural Material

Spec. Guides

Specify our products using the Specification Logo

Watch & Learn about this product

/

Schluter®-ECK-KI

Heavy-duty Corners

Schluter®-ECK-KI

Decorative, profile for repairing inside wall corners in retrofit applications

Schluter®-DILEX-EHK

Cove-shaped Profiles

Schluter®-DILEX-EHK

Stainless steel cove-shaped profile for inside wall corners and floor/wall transitions

Schluter®-ECK-K

Heavy-duty Corners

Schluter®-ECK-K

Retrofit edge-protection profile for outside corners in industrial applications

Schluter®-RONDEC

Edging & Outside Wall Corners

Schluter®-RONDEC

Finishing and edge-protection profile with a rounded reveal surface

Schluter®-ECK-E

Heavy-duty Corners

Schluter®-ECK-E

Heavy-duty edge-protection profile for outside corners in industrial environments

Schluter®-DILEX-HKU

Cove-shaped Profiles

Schluter®-DILEX-HKU

Stainless steel cove-shaped profile with inverted anchoring leg

Schluter®-PROCUT-TSM

Tools

Schluter®-PROCUT-TSM

Cutting wheel for metal profiles