Add image to project

QUADEC features a squared edge and is used on the outer rim of the bench. DILEX-EKE, in sand pebble, is used for the floor-to-wall transition. KERDI-BOARD building panels are used to create the two-tiered bench and partition wall. The KERDI-BOARD-ZA U-shaped profile is used to finish the edges of the partition wall. KERDI-DRAIN in anodized aluminum with a brushed nickel grate is featured in the center of the shower. KERDI, KERDI-BAND, KERDI-KERECK, and KERDI-SEAL-PS/-MV provide waterproofing from the floor to the ceiling behind the tile.

Add image to project

DILEX-EKE in sand pebble is featured in the inside corners of this beige shower, and KERDI-DRAIN is shown with a brushed nickel grate.

Add image to project

The DILEX-EKE in sand pebble blends in seamlessly to these inside wall corners.

Add image to project

QUADEC is applied to the outside corner of the bench, while the DILEX-EKE in sand pebble eliminates the need for caulking, and creates a subtle floor/wall transition.

Add image to project

QUADEC profile used on this bench, with matching 90°corners.

Add image to project

The QUADEC profile creates a square-edged trim to the front of the bench, while the DILEX-AHK creates a cove-shaped smooth transition to the wall.

Add image to project

The KERDI-BOARD-ZA brushed stainless steel, U-shaped profile is used to finish the visible edges of the KERDI-BOARD panel used to create the partition wall. The QUADEC square-edge profile finishes and protects the edges of the tile.

/

Products used in this project:

Schluter®-QUADEC

Schluter®-
QUADEC

Finishing and edge-protection profile with a squared reveal surface

Schluter®-DILEX-AHK

Schluter®-
DILEX-AHK

Anodized aluminum cove-shaped profile for inside wall corners and floor/wall transitions with limited movement

Schluter®-DILEX-EKE

Schluter®-
DILEX-EKE

Corner movement joint profile for inside wall corners and floor/wall transitions

Schluter®-KERDI-BOARD

Schluter®-
KERDI-BOARD

Waterproof, multifunctional tile substrate and building panel

Schluter®-KERDI-BOARD-ZA

Schluter®-
KERDI-BOARD-ZA

U-shaped profile for finishing partition walls and shelves

Schluter®-KERDI-DRAIN

Schluter®-
KERDI-DRAIN

Floor drain with integrated bonding flange

Schluter®-KERDI

Schluter®-
KERDI

Bonded waterproofing and vapor-retardant membrane

Schluter®-KERDI-BAND

Schluter®-
KERDI-BAND

Waterproofing strip for sealing abutting joints of Schluter® membranes and building panels

Schluter®-KERDI-KERECK-F/-KERS-B

Schluter®-
KERDI-KERECK-F/-KERS-B

Preformed, waterproofing corners

Schluter®-KERDI-SEAL-PS/-MV

Schluter®-
KERDI-SEAL-PS/-MV

Prefabricated seals for pipe protrusions