Schluter®-RONDEC-STEP

Multi-functional profile covers the sub-assembly of countertops and stairs

Schluter®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The top of the profile features a symmetrically rounded edge that matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly.
  • Prevents tile edges from chipping on countertops and stairs
  • The top of the profile features a symmetrically rounded edge that matches the RONDEC profile
  • The vertical leg of the profile hides the exposed edge of the sub-assembly
  • Features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile
  • Ideal for residential applications or areas exposed to light foot traffic (stairs)
  • Available in various finishes of anodized aluminum
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The profile features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile. The top of the profile features a symmetrically rounded edge with 1/4" (6 mm) radius, which matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the subassembly. In addition, the profile effectively protects tiles in the edge area from mechanical and impact stresses. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

RONDEC-STEP is suitable for residential applications, e.g., stairs not exposed to heavy traffic, and countertops. RONDEC-STEP is available in two different vertical leg lengths, 1-1/2" (39 mm) and 2-1/4" (57 mm), to cover the edge of the sub-assembly. The profile is selected according to the appropriate tile (H) and sub-assembly (A) thicknesses.

The profile is available in anodized aluminum with various finishes to allow for decorative design and interesting accents. Matching corners for the RONDEC-STEP are available.

The Schluter®-RONDEC-STEP profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. In the case of anodized aluminum do not use abrasive cleaning agents.

1. Select the profile according to the tile thickness and format and the subassembly thickness.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.

3. Press the perforated anchoring leg of profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).

7. Fill joints completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: Matching corners are available for RONDEC-STEP. The corners are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories.

Data sheets

Stair Nosing Profiles Data Sheet
679.22 KB
Pdf

Product Table

11241-preview
15.39 KB
RondecStep
170.88 KB
Pdf

Warranties

StairNosing-Profiles-Warranty
57.5 KB
Pdf
Wall and Countertop Profiles Warranty
27.28 KB
Pdf

Brochures and Pamphlets

Profile Brochure
2.14 MB
Pdf
Profile Finishes and Colors
2.45 MB
Pdf

CAD drawings

schlueter_cad_rondec_step39_metr
38.03 KB
Pdf
schlueter_cad_rondec_step57_metr
54.51 KB
DWG
schlueter_cad_rondec_step57_imp
99.69 KB
DWG
schlueter_cad_rondec_step39_imp
82.35 KB
DWG
schlueter_cad_rondec_step57_metr
16.09 KB
Pdf
schlueter_cad_rondec_step35_imp
16.84 KB
Pdf
schlueter_cad_rondec_step57_imp
16.02 KB
Pdf
schlueter_cad_rondec_step_inst
6.13 KB
Pdf
schlueter_cad_rondec_step_inst
32.88 KB
DWG
schlueter_cad_rondec_step39_imp
42.08 KB
Pdf
schlueter_cad_rondec_step35_metr
54.32 KB
DWG
schlueter_cad_rondec_step39_metr
82.44 KB
DWG
schlueter_cad_rondec_step35_imp
99.55 KB
DWG
schlueter_cad_rondec_step35_metr
17.8 KB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Stairs / Cover the Sub-Assembly

Schluter®-SCHIENE-STEP

For Countertops

Schluter®-RONDEC-CT

For Walls / Edging & Outside Wall Corners

Schluter®-RONDEC

For Stairs / Cover the Sub-Assembly

Schluter®-TREP-FL