Schluter®-BEKOTEC-BRS/KF
Edge strip for poured screeds
Share:
The Schluter®-BEKOTEC-BRS/KF is an edge strip for poured screeds, with a polyethylene-adhesive leg.
- Roll measures 82' (25 m) long
- Dimensions of strip are 3-1/8" (8 cm) wide and 5/16" (8 mm) thick
- Features one adhesive strip for fastening to wall and one adhesive leg which prevents poured screeds from flowing beneath the board
- Made of polyethylene foam
Find recommended accessories here
The Schluter®-BEKOTEC-BRS/KF is an edge strip for poured screeds, with a polyethylene-adhesive leg.
BEKOTEC products do not rot and require no special maintenance.
If a poured screed is to be applied, the Schluter®-BEKOTEC-BRS/KF or -BRS/KSF edge strip with adhesive leg is used. The-BRS/KF edge strip is attached to the wall using the adhesive strip on its backside, while the -BRS/KSF edge strip is self-supporting. The screed panel is placed onto the self-adhesive foam leg of either the -BRS/KF or -BRS/KSF to prevent back-flow of the screed under the panel.Note: For complete system installation guidelines and warranty criteria you can also view the downloadable PDF of copy of the Schluter®-Modular Screed Systems Technical Data Sheet.
