Schluter®-DILEX-BTS

Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.

  • Designed to allow movement and reduce stress in large, tiled areas
  • Eliminates the need for caulking
  • Prevents cracking and delamination of tiles
  • Designed for retrofit applications
  • Maintenance-free
  • Suitable for use in warehouses, production facilities, shopping centers, airports, train stations, parking garages, etc.
  • May also be used in coverings cleaned with machines
  • Available in satin anodized aluminum
Read more

Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.

  • Designed to allow movement and reduce stress in large, tiled areas
  • Eliminates the need for caulking
  • Prevents cracking and delamination of tiles
  • Designed for retrofit applications
  • Maintenance-free
  • Suitable for use in warehouses, production facilities, shopping centers, airports, train stations, parking garages, etc.
  • May also be used in coverings cleaned with machines
  • Available in satin anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-DILEX-BTS

Schluter®-DILEX-BTS

Anodized aluminum expansion joint profile with 1-3/16” (30 mm)-wide telescopic center designed for retrofit applications
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS

Product type

Next

Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.

DILEX-BTS can be inserted into existing joint spaces. The joints must be at least 1-3/4" (44 mm) wide and 3/8" (10 mm) deep. The lateral anchoring legs are adhered to the existing covering with a suitable adhesive (e.g., epoxy resin) or mechanically fastened to the covering with the appropriate screws.

Schluter-DILEX-BTS requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents. The oxidation layer on brass or aluminum can be removed by using a conventional polishing agent, but will form again. In the case of anodized aluminum, do not use abrasive cleaning agents.

Downloads

FAQ

Architectural Material

Specify our products using the Specification Logo

Watch & Learn about this product

/

Schluter®-DILEX-BT

Surface & Expansion Joints

Schluter®-DILEX-BT

Anodized aluminum expansion joint profile with 1-3/16” (30 mm)-wide telescopic center

Schluter®-DILEX-BTO

Inside Corner Movement Joints

Schluter®-DILEX-BTO

Anodized aluminum expansion joint profile for bridging expansion joints at floor/wall transitions

Schluter®-DILEX-EDP

Surface & Expansion Joints

Schluter®-DILEX-EDP

Stainless steel surface joint profile with 15/32” (12 mm)-wide tongue-and-groove movement zone

Schluter®-DILEX-KSN

Surface & Expansion Joints

Schluter®-DILEX-KSN

Surface movement joint profile with a 7/16” (11 mm)-wide movement zone and replaceable rubber insert