Schluter®-DIADEC

Schluter®-DIADEC is an anodized aluminum finishing and edge-protection profile for outside corners of tiled surfaces. The reveal of the profile forms a 45° beveled edge.

  • Features a 45° beveled edge
  • Prevents tile edges from chipping
  • Integrated joint spacer establishes a defined uniform joint cavity between the tile and the profile
  • Outside corner accessory can be used with any size of the DIADEC profile
  • Available in various finishes of anodized aluminum
Read more

Schluter®-DIADEC is an anodized aluminum finishing and edge-protection profile for outside corners of tiled surfaces. The reveal of the profile forms a 45° beveled edge.

  • Features a 45° beveled edge
  • Prevents tile edges from chipping
  • Integrated joint spacer establishes a defined uniform joint cavity between the tile and the profile
  • Outside corner accessory can be used with any size of the DIADEC profile
  • Available in various finishes of anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-DIADEC

Schluter®-DIADEC

Finishing and edge-protection profile with 45° beveled edge for outside wall corners and edges.
Schluter®-DIADEC
Schluter®-DIADEC
Schluter®-DIADEC
Schluter®-DIADEC
Schluter®-DIADEC
Schluter®-DIADEC
Schluter®-DIADEC

Product type

Next

AccessoriesLearn More

Recommended products based on your specifications

/

Schluter®-DIADEC is a finishing and edge-protection profile for outside corners of tiled surfaces. The reveal of the profile forms a 45° beveled edge. DIADEC features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile.

1. Select profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar over the area where the profile will be placed. If the DIADEC profile is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).

7. Fill the joints completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from anodized aluminum.

Note: A matching outside corner is available and fits all sizes of DIADEC. Corners are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories.

The Schluter®-DIADEC profile requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents. Do not use abrasive cleaning agents.

Downloads

Warranties

Brochures and Pamphlets

Data sheets

FAQ

Watch & Learn about this product

/

Schluter®-QUADEC

Edging & Outside Wall Corners

Schluter®-QUADEC

Finishing and edge-protection profile with a squared reveal surface

Schluter®-RONDEC

Edging & Outside Wall Corners

Schluter®-RONDEC

Finishing and edge-protection profile with a rounded reveal surface

Schluter®-INDEC

Edging & Outside Wall Corners

Schluter®-INDEC

Finishing and edge-protection profile for outside corners with a square, recessed groove

Schluter®-DECO-DE

Edging & Outside Wall Corners

Schluter®-DECO-DE

Decorative, edge-protection profile for 135° outside corners