Schluter®-TREP-G/-GK

Stair-nosing profile with replaceable non-slip tread, mineral grain coating

Schluter®-TREP-G and TREP-GK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for a durable, safe and visually appealing stair-nosing design. TREP-GK is subsequently bonded to existing applications (i.e. as a repair).
  • Prevents tile edges on stairs from chipping
  • Ensures a slip-resistant wear surface
  • Features a self-adhesive slip-resistant tread with colored embedded mineral grain coating (various colors available)
  • Slip-resistant tread is replaceable
  • Features a stainless steel anchoring leg which is embedded in the tile bond coat
  • Ideal for offices, shopping malls, and other public areas
  • TREP-GK is installed as a retrofit application
  • End caps available
  • Available in brushed stainless steel
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-TREP-G is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The profile is made of attractive and durable stainless steel with a special slip-resistant tread, making it particularly suited for areas subjected to heavy foot traffic, such as offices or public buildings. The surface features a self-adhesive, slip-resistant tread with an embedded mineral grain coating. The treads are available in a variety of colors and can be replaced in case of damage or wear. The profile can be integrated into stairs covered with ceramic tile or natural stone, as well as into a screed or surface coating. TREP-G is available in 1-3/16" (30 mm) and 2-5/32" (55 mm) widths.

Schluter®-TREP-GK is a variant of the profile without an anchoring leg. TREP-GK is adhered to existing steps, e.g., for retrofitting over damaged edges, eliminating the need to replace the entire step. TREP-GK is available in 1-11/32" (34 mm) and 2-21/64" (59 mm) widths.

Matching end caps are available.

The Schluter®-TREP-G stair nosing profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion.Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides).Do not use abrasive cleaning agents and tools. 

Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

TREP-G

1. Select the profile according to the tile thickness and format.

2. Install riser tile flush with the stair tread surface.

3. Using a notched trowel, apply thin-set mortar along edge area above riser.

4. Fill the cavity on the underside of the profile with the thin-set mortar.

5. Press the trapezoid-perforated anchoring leg of the profile into the thin-set mortar, making sure the front edge of the profile overlaps the riser tile. Full coverage must be obtained at the edge area to ensure support of the profile.

6. Trowel additional thin-set mortar over the anchoring leg and the stair tread surface to ensure full coverage and support of the tile edges.

7. Solidly embed the tiles so that the tiled surface is flush with the top of the profile.

8. A joint of approx. 1/16" - 1/8" (1.5 - 3 mm) should be left between the tile and the profile.

9. Fill the joint completely with grout or setting material.

TREP-GK

1. Clean the stair nosings and repair damaged areas if applicable.

2. Clean or degrease the underside of the profile.

3. Adhere the profile by fully embedding it into a suitable adhesive (e.g., epoxy resin or KERDI-FIX, depending on the substrate).

Note: The upper profile edge of TREP-GK is approximately 1/16" (1.5 mm) higher than the stair covering.

Warranties

StairNosing-Profiles-Warranty
69.6 KB
Pdf

Product Table

11213-preview
19.91 KB
Profiles_Stairs
631.71 KB
Pdf

Brochures and Pamphlets

Commercial Product Overview
1.7 MB
Pdf
Profile Brochure
4.41 MB
Pdf
Profile Finishes and Colors
2.82 MB
Pdf

Data sheets

Stair Nosing Profiles Data Sheet
679.22 KB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

CAD drawings

schlueter_cad_trep_g_s_inst
80.01 KB
DWG
schlueter_cad_trep_gk_s_metr
85.98 KB
DWG
schlueter_cad_trep_gk_s_imp
93.42 KB
DWG
schlueter_cad_trep_gk_b_imp
24.09 KB
Pdf
schlueter_cad_trep_g_b_inst
23.38 KB
Pdf
schlueter_cad_trep_gk_b_metr
93.8 KB
DWG
schlueter_cad_trep_g_s_metr
50.89 KB
Pdf
schlueter_cad_trep_g_b_imp
55.14 KB
Pdf
schlueter_cad_trep_gk_s_metr
21.31 KB
Pdf
schlueter_cad_trep_g_s_imp
54.09 KB
Pdf
schlueter_cad_trep_gk_b_inst
22.34 KB
Pdf
schlueter_cad_trep_g_b_metr
45.42 KB
Pdf
schlueter_cad_trep_gk_b_metr
20.81 KB
Pdf
schlueter_cad_trep_g_b_inst
102.79 KB
DWG
schlueter_cad_trep_gk_b_inst
106.08 KB
DWG
schlueter_cad_trep_g_b_imp
116.35 KB
DWG
schlueter_cad_trep_g_s_imp
91.58 KB
DWG
schlueter_cad_trep_g_s_inst
24.42 KB
Pdf
schlueter_cad_trep_g_b_metr
120.72 KB
DWG
schlueter_cad_trep_gk_s_inst
21.8 KB
Pdf
schlueter_cad_trep_gk_b_imp
94.31 KB
DWG
schlueter_cad_trep_g_s_metr
100.42 KB
DWG
schlueter_cad_trep_gk_s_imp
22.6 KB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

How to install tile edge trim on stairs: Schluter®-TREP-G profile

How to install tile edge trim on stairs: Schluter®-TREP-G profile

12:18
How to install tile edge trim on stairs: Schluter®-TREP-GK profile

How to install tile edge trim on stairs: Schluter®-TREP-GK profile

04:21
Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Stairs / Slip-resistant Treads

Schluter®-TREP-E/-EK

For Stairs / Slip-resistant Treads

Schluter®-TREP-EFK

For Stairs / Slip-resistant Treads

Schluter®-TREP-SE-S-B

For Stairs / Cover the Sub-Assembly

Schluter®-TREP-FL

For Stairs / Cover the Sub-Assembly

Schluter®-SCHIENE-STEP