Schluter®-DILEX-EHK

Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.

  • Eliminates the need for caulking
  • Features a 23/32"(18.5 mm)-wide radius to prevent water penetration and dirt accumulation, making cleaning simple
  • Ideal for tiled environments with high sanitary requirements, such as commercial kitchens, bathrooms, and food processing plants
  • Designed for applications where limited movement in expected
  • 90° and 135° inside and outside corners, connectors, and end caps available
Read more

Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.

  • Eliminates the need for caulking
  • Features a 23/32"(18.5 mm)-wide radius to prevent water penetration and dirt accumulation, making cleaning simple
  • Ideal for tiled environments with high sanitary requirements, such as commercial kitchens, bathrooms, and food processing plants
  • Designed for applications where limited movement in expected
  • 90° and 135° inside and outside corners, connectors, and end caps available
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-DILEX-EHK

Schluter®-DILEX-EHK

Stainless steel cove-shaped profile for inside wall corners and floor/wall transitions
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK

Product type

Next

Schluter®-DILEX-EHK features trapezoid-perforated anchoring legs, made of stainless steel, which are secured in the mortar bond coat, and a stainless steel cove section that forms the visible surface. The profile’s 23/32" (18.5 mm) radius prevents the accumulation of dirt and makes cleaning simple. The profile separates tile fields that meet at inside corners where limited movement is expected.

1. Select profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid-perforated anchoring legs will be placed.

3. Press the perforated anchoring leg(s) of the profile into the mortar.

Note: Install inside and outside corners, connectors, and end caps prior to setting tile. The use of thin-set mortar or similar may be required to achieve a proper fit. DILEX-EHK accessories are applied using a permanently elastic, waterproof adhesive (e.g., KERDI-FIX or silicone). Prior to application, any contact-inhibiting substances (e.g., grease, etc.) must be removed. The connectors should overlap the profiles by at least 3/8" (10 mm).

4. Trowel additional thin-set mortar where the tiles are to be installed.

5. Solidly embed the tiles, ensuring full coverage and support of the tile edges, and align flush with the top of the profile, leaving a joint of approximately 1/16" – 1/8" (1.5 - 3 mm) between the tile and the profile.

6. Fill the joints completely with grout or setting material.

DILEX-EHK requires no special maintenance or care and are resistant to mold and fungi. Clean profile using common household cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

FAQ

Architectural Material

Specify our products using the Specification Logo

Watch & Learn about this product

/

Schluter®-DILEX-AHK

Cove-shaped Profiles

Schluter®-DILEX-AHK

Anodized aluminum cove-shaped profile for inside wall corners and floor/wall transitions with limited movement

Schluter®-DILEX-HKU

Cove-shaped Profiles

Schluter®-DILEX-HKU

Stainless steel cove-shaped profile with inverted anchoring leg

Schluter®-DILEX-HKS

Cove-shaped Profiles

Schluter®-DILEX-HKS

Stainless steel cove-shaped profile with an integrated movement zone for floor/wall transitions

Schluter®-QUADEC

Edging & Outside Wall Corners

Schluter®-QUADEC

Finishing and edge-protection profile with a squared reveal surface

Schluter®-DILEX-AHKA

Cove-shaped Profiles

Schluter®-DILEX-AHKA

Anodized aluminum cove-shaped profile for transitions between walls to be tiled and previously finished floors

Schluter®-DILEX-HK

Cove-shaped Profiles

Schluter®-DILEX-HK

PVC cove-shaped profile with CPE movement zone for floor/wall transitions

Schluter®-DILEX-PHK

Cove-shaped Profiles

Schluter®-DILEX-PHK

PVC cove-shaped profile for corners for inside wall corners and floor/wall transitions with limited movement

Schluter®-DILEX-HKW

Cove-shaped Profiles

Schluter®-DILEX-HKW

PVC cove-shaped profile for inside wall corners and floor/wall transitions with limited movement