Schluter®-SHOWERPROFILE-WS/-WSK

The Schluter®-SHOWERPROFILE-WS and SHOWERPROFILE-WSK are two-part profiles that form a splashguard at the entrance of barrier-free showers.

  • The profile is set in conjunction with the tile covering and can be combined with either a semi-circular lip or a collapsible upright lip
  • Both variants allow for wheelchair accessibility
  • Choose SHOWERPROFILE-WSK for retrofit applications
  • Available in anodized aluminum
Read more

The Schluter®-SHOWERPROFILE-WS and SHOWERPROFILE-WSK are two-part profiles that form a splashguard at the entrance of barrier-free showers.

  • The profile is set in conjunction with the tile covering and can be combined with either a semi-circular lip or a collapsible upright lip
  • Both variants allow for wheelchair accessibility
  • Choose SHOWERPROFILE-WSK for retrofit applications
  • Available in anodized aluminum
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-SHOWERPROFILE-WS/-WSK

Schluter®-SHOWERPROFILE-WS/-WSK

Profile that forms a splashguard in barrier-free showers
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK
Schluter®-SHOWERPROFILE-WS/-WSK

Product type

Next

Schluter®-SHOWERPROFILE-WS and Schluter®-SHOWERPROFILE-WSK system profiles, together with the Schluter®-SHOWERPROFILE-WSL/-WSC inserts, form a splashguard at the entrance of curbless showers.

Schluter®-SHOWERPROFILE-WS is an anodized aluminum support profile that is set in conjunction with the tile using thin-set mortar. It has a 3/4" (19 mm) –wide visible surface and a height of 5/16" (8 mm). Where thicker tiles are used, simply fill the space below the profile with thin-set mortar.

Schluter®-SHOWERPROFILE-WSK is an anodized aluminum support profile that is adhered to the tile surface. It has a 2-1/16" (52 mm) –wide visible surface and a height of 5/16" (8 mm).

SHOWERPROFILE-WS

1. Install the tile covering up to where the profile will be installed.

2. Apply a sufficient amount of thin-set mortar to this area and to the back of the profile to achieve full coverage. Press the profile into the mortar until its surface is flush with the tile.

3. Set adjacent rows of tile, leaving a space of approximately 1/16" - 1/8" (1.5 - 3 mm) between the profile and tile.

4. Cut the SHOWERPROFILE-WSL/-WSC insert to length and insert into the profile.

SHOWERPROFILE-WSK

1. Apply a bead of adhesive to the underside of the profile legs where contact is made with the floor, and set the profile. Note: End caps are used when the profile does not abut a vertical surface. Install end caps with Schluter®-KERDI-FIX, silicone, or a similar adhesive before installing the profile.

2. Use a suitable cleaning agent to remove any excess adhesive after placement of the profile.

3. Cut the SHOWERPROFILE-WSL/-WSC insert to length and insert into the profile.

The Schluter®-SHOWERPROFILE-WS and Schluter®-SHOWERPROFILE-WSK profiles require no special maintenance or care and are resistant to mold and fungi. Clean the profiles using common household cleaning agents. Stainless steel exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Do not use abrasive or alkaline cleaning agents.

Downloads

Warranties

Brochures

Data sheets

Handbooks

FAQ

Architectural Material

Spec. Guides

Specify our products using the Arcat Logo

/

Profiles

Schluter®-SHOWERPROFILE-S

Two-part profile with tapered edge to cover adjoining tile edges

Waterproofing (KERDI)

Schluter®-KERDI

Bonded waterproofing and vapor-retardant membrane

Drains

Schluter®-KERDI-LINE

Low-profile linear floor drain

Prefabricated Substrates

Schluter®-KERDI-SHOWER-L/-LS

Prefabricated sloped shower trays for accommodating the KERDI-LINE linear drain