Schluter®-DILEX-BWB

PVC surface joint profile with 3/8” (10 mm)-wide movement zone

Schluter®-DILEX-BWB is a prefabricated surface joint profile with rigid PVC anchoring legs that protect tile edges. It features a 3/8” (10 mm)-wide, soft CPE movement zone that separates individual fields in the tile covering and forms the visible surface.
  • Available in four new colors to simplify the selection of a matching grout
  • Designed to allow movement and reduce stress in large, tiled areas
  • Eliminates the need for caulking
  • Prevents cracking and delamination of tiles
  • Suitable for residential to medium-duty commercial applications subject to light mechanical loads
  • Ideal for offices and stores
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DILEX-BWB features trapezoid-perforated anchoring legs, made of recycled rigid PVC, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the soft chlorinated polyethylene (CPE) movement zone, which also forms the visible surface. The movement zone is 3/8" (10 mm) wide, matching common movement joint widths, and is thus capable of accommodating relatively large movements. DILEX-BWB is suitable for both residential use and medium-duty commercial applications subject to light mechanical loads (e.g., offices or stores).

DILEX-BWB requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents.

1. Select the profile according to the tile thickness and format.

2. Using a notched trowel, apply thin-set mortar over the area where the profile is to be placed. The profile must align directly with movement joints in the substrate below.

3. Press the perforated anchoring legs of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring legs to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. A joint of approximately 1/16" - 1/8" (1.5 - 3 mm) should be left between the tile and the profile.

7. Fill the joint completely with grout or setting material.

Data sheets

Movement Joints Data Sheet
1.34 MB
Pdf

Product Table

11209-preview
15.78 KB
MovementJoint_Profiles
1.94 MB
Pdf

Warranties

MovementJointsandCoveShaped-Profiles-Warranty
57.92 KB
Pdf

Brochures and Pamphlets

Product Overview
1.5 MB
Pdf
Profile Brochure
4.41 MB
Pdf
Profile Finishes and Colors
2.82 MB
Pdf

Articles

tileletter-tiling-entryways-foyers-kerdi
4.35 MB
Pdf

CAD drawings

schlueter_cad_dilex_bwb_imp
4.12 KB
Pdf
schlueter_cad_dilex_bwb_imp
34.91 KB
DWG
schlueter_cad_dilex_bwb_inst
15.67 KB
Pdf
schlueter_cad_dilex_bwb_metr
38.26 KB
DWG
schlueter_cad_dilex_bwb_inst
36.7 KB
DWG
schlueter_cad_dilex_bwb_metr
3.97 KB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-BWS

Movement Joint Profiles / Perimeter Joints

Schluter®-DILEX-BWA

Cove-shaped Profiles

Schluter®-DILEX-EKE

Uncoupling (DITRA)

Schluter®-DITRA & DITRA-XL

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-KSN

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-AKWS