Schluter®-TROBA-PLUS

Schluter®-TROBA-PLUS is a reliable and durable sub-surface drainage system that permits water to drain off freely and reliably.

  • Cone-shaped studs are positioned closely together and are covered by a water permeable filter fabric
  • Supports the floor covering over the entire surface, thus creating a continuous drainage area above the waterproofing layer
  • Ideally designed for exterior balconies and terraces
Read more

Schluter®-TROBA-PLUS is a reliable and durable sub-surface drainage system that permits water to drain off freely and reliably.

  • Cone-shaped studs are positioned closely together and are covered by a water permeable filter fabric
  • Supports the floor covering over the entire surface, thus creating a continuous drainage area above the waterproofing layer
  • Ideally designed for exterior balconies and terraces
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-TROBA-PLUS

Schluter®-TROBA-PLUS

Sub-surface drainage system (5/16" [8 mm]-thickness)
Schluter®-TROBA-PLUS
Schluter®-TROBA-PLUS
Schluter®-TROBA-PLUS
Schluter®-TROBA-PLUS

Product type

Next

Schluter®-TROBA-PLUS is a durable sub-surface drainage system that permits water to drain off freely and reliably. The closely positioned, cone-shaped studs are covered by a water permeable filter fabric. They serve to support the floor covering over the entire surface, thus creating a continuous drainage area above the waterproofing layer.

1. The load-bearing substrate and waterproofing membrane must be adequately sloped toward, and connected to, the designated drainage exit. Prior to laying the Schluter-TROBA-PLUS, any severe defects in the waterproofed slope must be corrected using an appropriate mortar.

2. Irrespective of slope, Schluter-TROBA-PLUS is loosely laid over the waterproofing membrane (filter fabric side up). Adjoin sections of Schluter-TROBA-PLUS by abutting the edges and overlapping the filter fabric.

3. The surface covering assembly is installed directly over the Schluter-TROBA-PLUS according to current industry standards. If tile is to be installed using the Schluter-DITRA system, please refer to the Schluter-DITRA Installation Handbook for complete installation instructions and warranty criteria.

Downloads

Data sheets

Warranties

Architectural Material

Specify our products using the Specification Logo

/

Schluter®-TROBA

Drainage (TROBA)

Schluter®-TROBA

Sub-surface drainage system (9/32" [7 mm]-thickness)

Schluter®-BEKOTEC-DRAIN

Modular Screed Systems

Schluter®-BEKOTEC-DRAIN

29/32" (23 mm)-thick modular screed system with evenly-spaced openings and drainage channels

Schluter®-DITRA-DRAIN/-STU

Drainage (TROBA)

Schluter®-DITRA-DRAIN/-STU

Drainage membrane for thin-bed tile assemblies in exterior applications (5/32” [4 mm]-thickness)

Schluter®-DITRA & DITRA-XL

Uncoupling (DITRA)

Schluter®-DITRA & DITRA-XL

Uncoupling and waterproofing membrane