Menu
Schluter®-DITRA-HEAT-E-KIT
The Schluter®-DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, DITRA-HEAT-E-HK heating cable, and either a DITRA-HEAT-E-RT touchscreen programmable thermostat or a DITRA-HEAT-E-WiFi programmable thermostat.
- Combine the beauty of tile with the comfort of an electric floor warming system—adding luxury to any room
- The kit contains the DITRA-HEAT uncoupling membrane to prevent tiles from cracking, heating cable, and either a white programmable touchscreen or WiFi capable thermostat.
- Customizable heating zones can be created by placing heating cables wherever heat is desired
- Easy to install; no need for clips, fasteners, or self-levelers
- Minimizes assembly thickness for easy transitions to lower surface coverings
- Provides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g. LVT)
The Schluter®-DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, DITRA-HEAT-E-HK heating cable, and either a DITRA-HEAT-E-RT touchscreen programmable thermostat or a DITRA-HEAT-E-WiFi programmable thermostat.
- Combine the beauty of tile with the comfort of an electric floor warming system—adding luxury to any room
- The kit contains the DITRA-HEAT uncoupling membrane to prevent tiles from cracking, heating cable, and either a white programmable touchscreen or WiFi capable thermostat.
- Customizable heating zones can be created by placing heating cables wherever heat is desired
- Easy to install; no need for clips, fasteners, or self-levelers
- Minimizes assembly thickness for easy transitions to lower surface coverings
- Provides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g. LVT)
Configure to Price
Add to
Project Dealer
Locator Product
Table
Project Dealer
Locator Product
Table
Product successfully added to Project List
You can now access your Project List or stay on this page
Go to Project List Continue browsing
Schluter®-DITRA-HEAT-E-KIT
All-inclusive electric floor warming kit
The Schluter®-DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, DITRA-HEAT-E-HK heating cable, and either a DITRA-HEAT-E-RT touchscreen programmable thermostat or a DITRA-HEAT-E-WiFi programmable thermostat.
All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the downloadable Schluter®-DITRA-HEAT Installation Handbook or to the installation video online.
Note: Type, thickness, and format of the tile or stone surface covering must be suitable for the intended application. Minimum tile format is 2" x 2" (5 cm x 5 cm).
Alternate Floor Coverings over DITRA-HEAT
Please refer to detail DH-AFC (see the Alternate Floor Coverings over DITRA-HEAT Technical Bulletin available for download below,) and the Schluter®-DITRA-HEAT Installation Handbook for complete installation guidelines.
Use our DITRA-HEAT calculator to find out what products you need to complete your specific installation.
Downloads
Brochures and Pamphlets
- DITRA-HEAT-DUO Brochure.pdf
- 0.44 MB
- DITRA-HEAT Brochure.pdf
- 1.02 MB
- DITRA-HEAT Pamphlet.pdf
- 0.24 MB
Warranties
- DITRA-HEAT Thermostat Warranty.pdf
- 0.06 MB
Data sheets
- DITRA-HEAT Data Sheet.pdf
- 4.2 MB
Handbooks
- DITRA-HEAT Installation Handbook.pdf
- 1.58 MB
- DITRA-HEAT Calculation Sheet.pdf
- 1.23 MB
FAQ
What is the minimum stud spacing when installing the Schluter®-DITRA-HEAT-E-HK heating cables?
A cable spacing of 3 studs between runs is standard. However, cable may also be spaced at continuously alternating 3 stud – 2 stud intervals in isolated...
Read moreCan mosaic tile be used with Schluter®-DITRA-HEAT?
The minimum required tile format for use with DITRA-HEAT is 2" x 2" (50 mm x 50 mm). Please call Schluter®-Systems...
Read moreHow long do I have to wait after the installing Schluter®-DITRA-HEAT to start using the system?
Schluter®-Systems recommends waiting 7 days after grouting before consistent use of the DITRA-HEAT system...
Read moreHow do I connect the Schluter®-DITRA-HEAT-E-HK Heating Cables to a Schluter®-DITRA-HEAT-E-RSD thermostat?
For instructions on connecting the DITRA-HEAT-E-RSD thermostat, please reference the Schluter®-DITRA-HEAT Thermostat User’s Guides or...
Read moreWhy are two floor temperature sensors provided with the Schluter®-DITRA-HEAT system?
Both floor temperature sensors are installed within the tile assembly. One sensor is connected to the thermostat, while...
Read more
